Description
Added on the 21/04/2021 08:21:39 - Copyright : Auto Moto EN
The brand with the four rings entered the electric era with the start of production of the Audi e-tron in the Brussels plant. The tradition-steeped production site was first extensively modernized and is now one of the most modern production sites for electric models in Europe. The electric drives are supplied by Audi’s own engine production plant in Győr, and the Brussels location has set up its own battery manufacturing facility. Many experiences from the production of the e-tron in Brussels are now being incorporated in the new BEV projects and the establishment of further production sites for electric vehicles.For the production of future electric models, Audi is relying on a high level of flexibility and valuable synergies within the Group: For example, the PPE platform (Premium Platform Electric) for the large electric cars was developed in cooperation with Porsche. The aim is to produce the PPE models at existing locations. The vehicle concept is based on the standardized plant structures and can be transferred to other factories quickly.Audi is also relying on synergy effects for the smaller models on the basis of the MEB platform (modular electrification platform): The production model of Audi Q4 e-tron concept, an electric SUV in the A segment, will roll off the assembly line at the Volkswagen plant in Zwickau, together with models from the VW and SEAT brands. Bundling the platforms in production this way enables the future large-volume electric models to be produced in large quantities and with great efficiency. The most important parts of the MEB models are made in the Group’s component plants, mainly in Kassel (drive modules), Salzgitter (electric motor parts) and Brunswick (batteries and suspension parts).Preparations for the production model of Audi e-tron GT concept, which will roll off the assembly line in the Böllinger Höfe near Neckarsulm together with the Audi R8 as of the end of 2020, are also already underway. While the high-performance sports car with a combustion engine is still made predominantly by hand, the electric Gran Turismo is to be manufactured with a higher degree of automation in the body shop. Both models pass through the same assembly, which is currently being expanded by 20 cycles to 36 cycles, as well as an overhead conveyor. Specific electric elements of the vehicle, such as the battery system, the drive or the thermal management, are prepared in special pre-assemblies and installed on the assembly line as a finished module.The plug-in hybrids are produced in the same locations as their respective product lines: For example the Audi Q5 TFSI e in San José Chiapa (Mexico) and the Audi A7 TFSI e in Neckarsulm. Audi is currently making two electrified models in local production in China: the A6 L e-tron and the Q2 L e-tron; the Audi e-tron will follow as of 2020.
Production at Audi Mexico - Body Shop
The new era of technology on which Audi has embarked can also be experienced in the interior of the Q4 e-tron and the Q4 Sportback e-tron. The instrument panel introduces itself with progressive elegance and underlines the airy feeling of spaciousness. The cockpit features a distinctly three-dimensional design, and its geometric volumes are interrelated in an electrifying way.In both the electric SUVs, the operating and display units take on the function of design elements more than ever. The digital instrument for the driver is embedded like a diamond between two volumes – a short one on the left-hand side, which incorporates an air vent, and a long one on the right-hand side. It extends all the way to the front passenger door and integrates further air vents. The central MMI touch display, which appears clean and light, occupies the space in front of it. It is tilted toward the driver and is positioned within ergonomically easy reach.A lean inlay, known as the tech layer, lies above the display and connects it with the instrument panel. The choice of surface materials for this panel includes open-pore lime wood, aluminum in two different designs, and plastic. The inlay in the S line interior will also be available as an alternative shortly after market launch with an innovative, anthracite-colored technical fabric that is made partly of recycled materials.
The new era of technology on which Audi has embarked can also be experienced in the interior of the Q4 e-tron and the Q4 Sportback e-tron. The instrument panel introduces itself with progressive elegance and underlines the airy feeling of spaciousness. The cockpit features a distinctly three-dimensional design, and its geometric volumes are interrelated in an electrifying way.In both the electric SUVs, the operating and display units take on the function of design elements more than ever. The digital instrument for the driver is embedded like a diamond between two volumes – a short one on the left-hand side, which incorporates an air vent, and a long one on the right-hand side. It extends all the way to the front passenger door and integrates further air vents. The central MMI touch display, which appears clean and light, occupies the space in front of it. It is tilted toward the driver and is positioned within ergonomically easy reach.A lean inlay, known as the tech layer, lies above the display and connects it with the instrument panel. The choice of surface materials for this panel includes open-pore lime wood, aluminum in two different designs, and plastic. The inlay in the S line interior will also be available as an alternative shortly after market launch with an innovative, anthracite-colored technical fabric that is made partly of recycled materials.
Series production of the Audi e-tron GT, the brand’s most powerful electric vehicle is launching at the Neckarsulm site. The production process at the Audi Böllinger Höfe is every bit as unique as the car itself.
|
Support : Technical 
- Content 
- Editors 
